Dark (opaque) inkjet Transfer Paper
2011-05-29
Product Name: Dark (opaque) inkjet Transfer Paper
Product Sizes Availability:
A4 (210mm X297mm) - 20 pcs/Sheets, 50sheets/BOX 20KG/box 45CM*32CM*18CM
Ink Compatibility: water based dye & pigment ink
1. Physical Characteristics:
Specifications Testing Method
Thickness (total) 300 µm ISO 534
Whiteness 96 W (CIE) CIELAB - System
Opacity >85% ISO 2471
Gloss (60°) 5
2. GENERAL DESCRIPTION
This product is recommended with wax crayons, Oil pastels, Fluorescent markers, Color Pencil, all Inkjet printers for dark-colored, white or light-colored T-shirts, aprons, gift bags, wool garment, mouse pads, photographs on quilts etc. The transfer peels off easily hot or after cool and can be applied with a regular household iron or heat press machine.
3. ADVANTAGE
Customize Fabric with favorite photos, color graphics and with makers for painting.
Designed for vivid results on dark-colored, white or light-colored cotton or cotton/polyester blend fabrics.
Ideal for personalizing t-shirts, canvas bags, aprons, gift bags, mouse pads, photographs on quilts etc.
Transfer peels off easily hot or after cooling.
Iron on with a regular household iron & a professional heat press machine.
4. Compatibility for Dark (opaque) ink jet Transfer Paper
It can be printed with water inks in most printers such as: Epson Stylus C82, C84, color 1520, 3000, Photo 890, R200, Pro4000, Pro7600, Pro9600, HP / Hewlett-Packard Inkjet 1000 Printer, Canon ink jet printer etc.
5. Printer Recommendations
Printer Settings for optimal print quality: To optimize print quality, printers should be set for photo print quality.
Printer and Ink Compatibility: It is designed to work with most water based pigment ink and dye ink.
7. Transfer processing
Prepare a stable, heat-resistant surface suitable for ironing on.
Preheat the iron to the highest setting, recommended ironing temperature 165°C.
You can also use a heat press, set 165°C for 25 seconds using moderate pressure.
Briefly iron the fabric to ensure that it is completely smooth, place the transfer film (clear polyester transfer film with adhesive) onto it with the printed image facing upwards.
Do not use the steam function.
Make sure that the heat is evenly transferred over the entire area.
Iron the transfer paper, applying normal pressure.
When moving the iron, less pressure should be given.
Don’t forget the corners and edges.
Continue ironing until you have completely traced the sides of the image. This entire process should take about 60-70 seconds for an 8”x 10” image surface. Follow-up by ironing the whole image quickly, heating all of the transfer paper again for approximately 10-13 seconds.
Peel the transfer film starting at the corner after the ironing process.
It is possible to use the same transfer film five times or more, if there are no ink arrears left on it.
8. Washing Instructions:
Wash inside out in COLD WATER. DO NOT USE BLEA
Dye ink Printing Sample heat press Instructions
Pigment ink Printing sample Heat Press Instructions
7. Washing Instructions:
Wash inside out in COLD WATER. DO NOT USE BLEACH. Place into the dryer or do hang to dry immediately. Please do not stretch the image transferred or the T-shirt as this may cause cracking to occur, If cracking or wrinkling does occur, please place a sheet of parchment paper over the transfer and heat press or iron for a few seconds making sure to press firmly over the entire transfer again. Please remember to not iron directly on the image surface.
8. Finishing Recommendations
Material Handling & Storage: conditions of 35-65% Relative Humidity and at a temperature of 10-30°C.
Storage of open packages: When an open packages of media is not being used remove the roll from the printer cover the roll with a plastic bag to protect it from contaminants if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll do not lay sharp or heavy objects on unprotected rolls and do not stack them.
