Digital transfer MIMAKI TS34 Printer machine
Model No.︰TS34
Brand Name︰DBX
Country of Origin︰Japan
Unit Price︰US $ 24600 / pc
Minimum Order︰1 pc
Product Description
Sublimation Printing machine Specifications
| JV33-130 | JV33-160 | JV33-260 | ||
|---|---|---|---|---|
| Head |
On-demand Piezo head (180nozzles x 8 lines) x1 head
|
|||
| Maximum print width | 1,361mm (53.5") | 1,610mm (63.3") | 2,632mm (103.6") | |
| Printing resolution | 540,720,1,440dpi | |||
| Printing mode
(scan x feed) |
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi | |||
| 720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi,
720 x 1,440dpi |
||||
| 1,440 x 1,440dpi | ||||
| Ink | Type | Exclusive Solvent ink: ES3 ink, SS21 ink | ||
| Exclusive aqueous pigment ink | ||||
| Exclusive dye sublimation ink | ||||
| Capacity | 4-color mode:440cc cartridge x 2/color, 880cc/color | |||
| 6-color mode:440cc cartridge x 1/color, 440cc/color | ||||
| Media | Size | 1,371mm (53.9") | 1,620mm (63.9") | 2,642mm (104.0") |
| Roll weight | Less than 25kg (55.1lbs.) | Less than 100kg (220lbs.) | ||
| Print surface | Face out | |||
| Roll inside diameter | 2 inch or 3 inch | |||
| Media cutting | Cutting on Y direction by cutter at the head | |||
| Media heater | Triple stage intelligent heater (Pre/Print/Post) | |||
| Media Take-up device | Roll take-up device (standard), inside/outside selectable | |||
| Interface | USB2.0 | |||
| Applicable standards | VCCI Class A,FCC Class A, UL 60950-1 | |||
| CE Marking (EMC directive, Low voltage directive),
CB report |
||||
| Power | AC100~120V±10%, AC220~240V±10%, 50/60Hz±1Hz |
|||
| Power consumption | Less than 1,440 VA | Less than 1,440 VA x 2 plugs | ||
| Operation environments | Usable temperature:20°C~35°C (64~95°F),
Humidity:35~65%RH (No condensation) |
|||
| Dimensions (W x D x H) | 2,289 x 739 x 1,424mm
(90.1" x 29.1" x 56.1") |
2,538 x 739 x 1,424mm
(99.9" x 29.1" x 56.1") |
3,650 x 1,302 x 1,424mm
( 143.7" x 51.3" x 56.1") |
|
| Weight | 145kg (320lbs.) | 160kg (353lbs.) | 450kg (992lbs.) | |
- Some of the samples in this website are artificial renderings.
- Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
- The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
- Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.
-
Creative inkjet technology and high quality ink provides ultra-high resolution printing
Create ultra-high resolution print Piezo inkjet system
Precise control of ink firing reproduces details of photo image at a maximum resolution of 1,440 dpi. Even edges of 4-point text are printed sharp and clear.
4-color mode realizes non-grainy finish Variable dot technology
By producing dots in three different sizes, smooth high resolution graphics are created without a grainy appearance. Even at high speed and in low resolution mode high quality printing is possible.
Ink performance is improved Triple stage intelligent heater
A triple stage intelligent heater automatically heats up the media to the appropriate temperature, thus improving the performance of ink. A newly mounted Post-heater quickens drying time and thus enables a fast take-up of the media.
Additional features and benefits to improve operation performance
High volumes and lower ink costs MBIS (Mimaki Bulk Ink System)
The bulk ink system using ink packs of aluminum achieves as stable and reliable ink ejection as printing solely with cartridges. It is possible to use both 2-liter ink packs in combination with regular 220/440cc cartridges for colors that are not so often used. In-end detection function to prevent misprints without ink is also available.The bulk ink system is an eco-friendly ink system that produces less waste while achieving continuous printing.
Stable print quality Head height adjustment
Head height can be adjusted to either 2mm or 3mm according to the media thickness. For the aqueous ink model, height head adjustment of either 4mm or 5mm* is available.
*adjustment by technician is required.
Drying speed is increased Automatic drying fan (option)
Drying speed can be improved with the use of a postheater.
The takeup reel can be used even when printing at high speed, improving efficiency and work flow.
Drying speed is increased Automatic drying fan (option)
Drying speed can be improved with the use of a postheater.
The takeup reel can be used even when printing at high speed, improving efficiency and work flow.
Payment Terms︰ Western Union /T/T
Product Image
